Self-adherent soft silicone dressing
Mepilex Border is an all-in-one foam dressing that effectively absorbs and retains exudate and maintains a moist wound environment. The Safetac layer seals the wound edges, preventing the exudate from leaking onto the surrounding skin, thus minimizing the risk for maceration. The Safetac layer ensures that the dressing can be changed without damaging the wound or surrounding skin or exposing the patient to additional pain.
Areas of useMepilex Border is designed for a wide range of exuding wounds such as leg and foot ulcers, pressure ulcers, surgical incisions, and traumatic wounds, such as skin tears, blisters, abrasions and secondary healing wounds.
Mepilex Border SacrumMepilex Border is also available shaped to specifically fit the sacral area.
Product descriptionMepilex Border is an absorbent and self-adherent soft silicone dressing. It consists of:
Safetac TechnologySafetac® is a patented soft silicone adhesive technology. Dressings with Safetac technology are atraumatic upon removal. These dressings minimize trauma to the wound and the surrounding skin, which minimizes pain to the patient. The risk of maceration is minimized by sealing the wound margins.
Mode of actionMepilex Border absorbs exudate, maintains a moist wound-healing environment and minimizes the risk for maceration.
As Mepilex Border maintains a moist wound environment, supporting debridement, there might be an initial increase in the wound size. This is normal and to be expected. In case studies, dressings with Safetac technology have demonstrated to normalize dry and scaly surrounding skin.Thanks to its absorptive and retentive properties Mepilex Border is suitable for use under compression bandaging. Mepilex Border can be used in combination with gels.
Intended useMepilex Border is designed for a wide range of exuding wounds such as pressure ulcers, leg and foot ulcers, surgical incisions, and traumatic wounds, such as skin tears, blisters, abrasions, and secondary healing wounds.
Mepilex Border can also be used on dry/necrotic wounds in combination with gels.
Instructions for use
Frequency of changeMepilex Border may be left in place for several days depending on the condition of the wound and the surrounding skin, or as indicated by accepted clinical practice.Mepilex Border should be changed when exudate is present at the pad edges.A change in dressing regimen can result in an initial increased level of exudates, which temporarily may require an increased change frequency.
PrecautionsIn case of signs of clinical infection, consult a health care professional for adequate infection treatment. Do not use Mepilex Border together with oxidizing agents such as hypochlorite solutions or hydrogen peroxide. Mepilex Border should be stored in dry conditions below 95°F(35°C). Sterility is guaranteed unless inner package is damaged or opened prior to use. Do not re-sterilize.
What is Mepilex Border?
Mepilex Border is a self-adherent absorbent soft silicone dressing. It consists of a soft silicone wound-contact layer, a flexible and absorbent pad of polyurethane foam and super absorbent fibers and a vapor-permeable polyurethane film backing. The wound-contact layer is covered with a polyethylene release film.
When is Mepilex Border indicated?
Mepilex Border is designed for a wide range of exuding wounds such as pressure ulcers, leg and foot ulcers, surgical incisions, and traumatic wounds, such as skin tears, blisters, abrasions, and secondary healing wounds. Mepilex Border can be used under compression bandages.
How does Mepilex Border work?
Mepilex Border absorbs excess exudate through the perforated hydrophobic Safetac layer into the pad, keeping the exudate away from the sensitive peri-wound area. At the same time the pad and the film backing provides a moist environment with minimal risk for the wound to dry out.Thanks to Safetac’s properties, Mepilex Border can be lifted without losing its adherent properties.
How does Mepilex Border perform under compression bandages?
Mepilex Border can be used in combination with compression bandages though absorption capacity decreases when a 40 mm Hg pressure is applied.
How has Mepilex Border been improved with the new backing film that was introduced in June 2006?
The new backing film features a number of improvements.The film has better breathability and thus the fluid handling capacity is improved, reducing the risk for leakage and maceration.It is viral proof giving protection from outer contamination (it has passed viral penetration test ASTM F1671).The film is more transparent which makes the dressing more discrete.The friction of the film is lower against clothes and linens for more secure fixation.
How can Mepilex Border be lifted and adjusted without loss of adherent properties?
When a tape with a common pressure sensitive adhesive is removed, a few cell layers are removed from the skin. These skin cells cover the adhesive that therefore is no longer adherent. Silicone adheres gently without removing any skin layers. The soft silicone layer is therefore intact and still adherent even after removal (see Safetac Manual).
Are there any sensitizing compounds in Mepilex Border?
The wound and skin contact layer is silicone that is inert. For example, skin creams and clothes contain silicone oil. The silicone contains 1 ppm (part per million) of Platinum, a concentration so low that no one can develop any sensitization or allergy. However, if a patient is already sensitized to Platinum, a skin reaction can be developed.In the “holes” of the border, acrylate adhesive can be exposed to the surrounding skin. There is a minimal risk that patients which are acrylate sensitive can develop a skin reaction. With the new backing film introduced in June 2006 the amount of acrylic adhesive has been decreased by 90%, which makes the risk for developing a skin reaction very marginal.
How should Mepilex Border be stored?
In dry conditions below 95°F (35°C).
What happens if Mepilex Border is stored above 95°F (35°C)?
Nothing more than that the pad becomes slightly yellow after a while; this is harmless and does not affect the performance of the product.
Does Mepilex Border influence the wound pH?
Mepilex Border is neutral and is assumed not to change the pH of the wound.
Does Mepilex Border cause any bad smell?
Do ozone depleting compounds exist in the foam manufacturing process?
Does gravitation have any effect on the absorption performance?
Yes, to a limited extent. Mepilex Border could be positioned "off-center," slightly below the wound, to compensate for gravitational effects. However, as the border seals the wound, the exudate will be absorbed by the pad.
Can Mepilex Border be sterilized by steam?
Should Mepilex Border be used together with oxidizing agents?
If possible, it should be avoided but as long as the wound/skin is dried thoroughly after using an oxidising agent, there is no risk using the combination (hypochlorite solutions and hydrogen peroxide are examples of oxidising agents).
Is the film backing waterproof?
Does local trauma affect the healing rate of chronic wounds?
Yes, trauma to the wound means a high risk of disrupting newly formed tissue.
Does local pain decrease healing rate in a chronic wound?
Yes, pain results in increased production of catecholamines and cortisol. An increase of catecholamines leads to vasoconstriction of the small arterioles. Cortisol increases catabolism, which leads to the breakdown of vital nutrients that are needed by the cells during the wound healing.
What should be done when a pressure ulcers has developed?
Does Mepilex Border clean the wound?
Should Mepilex Border be used on infected wounds?
In case of clinical signs of infection the use of Mepilex Border may be continued if proper infection treatment is initiated.
Does the exudate level change when changing from one dressing regimen to another?
It sometimes happens that the exudate level increases when treatment regimen is changed. This should however probably in most cases be regarded as something positive as it could be a sign of a start of a cleaning up process.
Is there a risk that Mepilex Border dries out the wound?
No, once the foam has started to absorb it takes a long time for it to dry out. The backing film also supports to keep the wound moist.
Will Mepilex Border cause any wound maceration?
No, normally not if Mepilex Border is changed in time before it is saturated.
When is Mepilex Border contraindicated?
A lot of case studies have been performed on a variety of wounds and indications. No contraindications have been discovered.
Does the wound seem to become bigger in the initial treatment phase?
Normally it does not; this depends on the healing stage of the wound.
Does Mepilex Border work in combination with gels?
Yes, laboratory tests show that Mepilex Border keeps the wound at the same moist level as Alldress without drying out. We have a lot of experience with Alldress working in combination with gels. There is also positive experience from our clinical tests.
Can Mepilex Border be used on dry wounds?
Yes, in combination with some hydration treatment.
Does Mepilex Border work together with Mesalt?
We have to date no patient case using the combination Mepilex Border and Mesalt but it is not believed to be a problem. It will work as well as the combination Mepitel / Mesalt and Alldress / Mesalt.
Can Mepilex Border be used on deep wounds?
Yes, preferably in combination with a wound filler like Mesalt or Melgisorb/Melgisorb Cavity or gels.
Can Mepilex Border be used on black wounds?
Yes, as a secondary dressing. We have a lot of experience with Alldress for treatment of dry necrotic wounds in combination with Hypergel. Laboratory tests show that Mepilex Border/Hypergel keeps the wound moist in the same way as Alldress/Hypergel.
Is it true that the skin adhesion of a hydrocolloid dressing decreases after 4-5 days in use and thereby the risk for stripping is avoided?
Yes, but on the other hand you can never be sure that you can leave it on for 4-5 days. Of some reason you might want to change already after 1-2 days and then the adhesion level is then still relatively high, with higher risk for skin stripping.
Is Mepilex Border bacteria proof?
Yes, Mepilex Border has passed a wet bacteria penetration test, PrEN 13795-4. The practical meaning would be that as long as the backing film is 100 % intact, no bacterial penetration will occur through the coated film. The product will then be protective against outer bacterial contamination. The average sizes of bacteria ranges from100-200 nm.
Is Mepilex Border viral proof?
Yes, Mepilex Border has passed ASTM F1671 Test performed by Nelson Laboratories, Ohio US. The practical meaning would be that as long as the backing film is 100 % intact, no viral penetration would occur through the coated film. The average size of a virus is 27 nm.
When should Mepilex Border be changed?
Mepilex Border may be left in place for several days, but should be changed before saturation or else as indicated by accepted clinical practice.
How do you remove Mepilex Border?
Gently lift one corner and slowly peel back the dressing (along the surface of the dressing).
Why should you remove Mepilex Border slowly?
This is the nature of micro-adherent soft silicone. The more slowly you peel off the dressing, the less force is required.
How should heavily exuding wounds be treated when leakage occur?
Change Mepilex Border more frequently.If more frequent changes does not seem to be cost-effective, change treatment to a combination of Mepitel and an absorptive pad.
Is Mepilex Border moisture proof?
Can Mepilex Border be cut to the wound size?
Mepilex Border is intended to be used as a ready made dressing. To apply it on an awkward area such as a heel, the border may be cut for better fit. Cut before removal of the release film.The pad itself should never be cut to avoid leakage and/or loose fibers in the wound.
How is Mepilex Border fixated?Normally Mepilex Border does not need any extra fixation. In extreme situations additional fixation might be needed. Use a polyurethane film, preferably, and be sure that only the border (not the pad) is covered in order not to decrease the fluid handling properties.
Is the border width of Mepilex Border wide enough?
Yes, as it is adherent all over the contact area, not only on the border.
Will Mepilex Border work together with the 4-layer system?
Could zinc-oxide paste be avoided when using Mepilex Border?
Yes, in general as the Safetac layer replaces the need for pastes.