Computer-controlled phantom: A robotic phantom of an exuding sacral pressure ulcers (PU)* was developed and used to compare Exufiber® and Exufiber® Ag+ to alternative market-leading dressings containing CMC fibres (silver and non-silver-containing).
Robotic phantom: A realistic rigid plastic replica of the pelvic bones and soft-tissue substitutes made of a two-component silicone rubber case in the shape of adult male buttocks. Continuous secretion of exudate into the sacral wound bed at various controlled, preset flow volumes and rates was simulated.
Exudate substitute fluids and treatments: Exudate substitute fluid formula to be able to control fluid viscosity, temperature and pH levels to simulate exudate types, e.g., thin, watery, thick, sticky, etc.
Products tested: Exufiber or Exufiber Ag+ as primary dressings and Mepilex® Border Sacrum as a secondary dressing. Expert clinicians guided the cutting and and fitting of the gelling fibre dressings to fill the wound cavity and the alternative non-Mölnlycke, CMC fibre dressings to fill the wound cavity.
The robotic phantom was moved into different positions for different lengths of time, while the exudate system was activated to test different situations and parameters.
Retention and fluid distribution tests
- Sorptivity was determined using weight tests of dressings after 5 to 15 hours of simulated use.
Material strength tests
- Durability was measured through tensile strength tests of the dressings.
The study found:
- Exufiber demonstrated 3x greater sorptivity (p<0.05), for supine configuration i.e. more fluid transfer to secondary dressing than non-Mölnlycke control dressing.
- Exufiber Ag+ dressings retained 51% of exudate fluid and transferred the other 49% into the secondary dressing compared to control, which transported only 31% of the fluid to the secondary dressing.
- Exufiber withstood 5x greater tensile energy (p<0.05) before failure than non-Mölnlycke control dressing.
Tensile strength: Exufiber
Tensile strength: non-Mölnlycke dressings
Exufiber: 5 times greater tensile energy
The study used a novel laboratory method and system to expose dressings to exudate‐like fluids at chemical, mechanical, thermodynamic, and use conditions, which replicate real‐world settings. The findings were:
- Good sorptivity of the primary dressing is critical to clearing excess exudate from the wound bed, especially when dressings perform against gravity
- Dressings with poor sorptivity have limited effective retention capacity when used in practice
- Exufiber and Exufiber Ag+ dressings demonstrated better sorptivity through capillary action than control dressings
- Exufiber dressings can withstand significantly greater mechanical energy levels before failure
* The PU indication is in CE markets only agreed for Exufiber and not Exufiber Ag+.